济宁市德海机械设备有限公司

Electro-hydraulic car arrester, electric car arrester,
rail hydraulic car arrester,
rail hydraulic car arrester, Shanxi car arrester monopoly, Shandong car arrester price, Jining Dehai Low price car arrester
Product introduction
The electric car arrester is composed of a frame electric control device transmission device and a car arrester device. The electric control device includes a power box contactor electromagnet, and the contactor passes through a wire It is connected to the power box, and the electromagnet is connected to the contactor through a wire. The transmission device includes a lifting link, a descending link, a steering plate, a driving rod, a connecting plate, and the upper ends of the lifting link and the descending link are in contact with the moving and closing suction heads of the electromagnet respectively. The lower end of the steering plate is connected to the upper end of the steering plate. The lower end of the steering plate is connected to one end of the driving rod. The other end of the driving rod is connected to one end of the connecting plate. The vehicle blocking device includes more than one row of blades and a machine base. and a horizontal connecting rod, each blade is connected to the horizontal connecting rod through a rotating shaft, and one end of the horizontal connecting rod is connected to the connecting plate.
Features of electric car arrester
This product has a simple structure, easy operation, easy installation, easy maintenance, quick action, safety and reliability, energy saving, and can be operated electrically, manually, or remotely. One machine has multiple uses and is low cost. This product not only overcomes some shortcomings of existing roadblock machines, but also realizes the function of deceleration slope, making it a multi-purpose machine.
Electric car arresters come in various forms, and are divided into single-track, double-track, manual, pneumatic, electro-hydraulic, single-type, single-track, and double-track. According to the usage requirements, the hydraulic drive device can be located on the left or right side, which are called left-hand or Right side layout. Please distinguish the left and right sides when delivering the goods. This equipment is divided into two types: track gauge and track gauge, and is suitable for standard mine cars.
As a traditional inclined lane anti-car setting, it is installed at the slope change point and used in conjunction with the inclined lane anti-sports car safety setting to form a one-slope and three-speed inclined lane anti-car system required by the national safety supervision department, that is, the upper parking lot Install car arresters, install car barriers, and install car arresters to prevent sports cars in the tunnel
Scope of application and working conditions
b Fire and explosion hazards and corrosive media
Product specifications and models
The hydraulic car arrester is a remote control hydraulic type, with two types: rail-holding type and self-restoring linkage type. It is used in mining enterprises without air source. Mining enterprises with air source can use remote control pneumatic car arrester. set up.
Structure and appearance of hydraulic car arrester
Hydraulic car arrester is mainly composed of pump station, remote control, car arrester settings and other parts.
Main technical parameters of hydraulic wheel arrester
> Product type
Hydraulic wheel arrester
Product model
Rated voltage
AC
Rail Distance

Adapt to mine car tonnage
Ton/ton
Allow maximum deformation

Remote control distance
Meters
Hydraulic system medium< br/> Water glycol
Weight
Maintenance
Daily maintenance and maintenance requirements
Wipe frequently to keep the surface of the instrument clean and dust-free to prevent dust from invading the inside of the machine.
Maintenance cycle
Self-inspection operators should perform self-inspection once a day, test whether the product software and hardware are normal, and observe whether there are any abnormalities in the various instructions of the product.
Normal maintenance procedures
When a fault occurs, the power supply should be disconnected first, and then troubleshooting should be carried out.
Maintenance and maintenance when parked for a long time
The equipment must be waterproof and moisture-proof to prevent the equipment from getting damp. b. Prevent the cylinder from rusting and lubricate it regularly.
Check whether the components in the control box, such as sealing rings, etc. are in good condition to prevent them from being damaged by high temperature and corrosion.
Packaging, transportation and storage
Precautions for packaging and transportation
Packaged products can be transported by water, land or air under the conditions of avoiding direct sunlight, rain, snow and falling, collision and strong earthquakes. Storage conditions, storage period and precautions
Packaged equipment should be stored at ambient temperature ~
, relative humidity not greater than
, dry and ventilated, free of acid, alkali or other corrosive, explosive, flammable gases A storage location that is free from damaging shock and vibration and protected from dust or thunderstorms.
Unpacking and Inspection
Precautions for Unpacking
When unpacking, be careful not to scratch the surface of the machine, do not hit it violently, and pay attention to waterproofing.
Check content
Whether there is any damage during transportation.
b Check whether the product is in good condition without serious scratches, peeling paint, bumps, deformation, etc. In addition to the product, the packaging box should also be accompanied by a packing list, product certificate, instructions for use, and a factory inspection report.
Quality Commitment
All products leaving the factory are inspected and qualified in accordance with the requirements of corporate standards to ensure that unqualified products will not leave the factory.
After-sales service commitment
Quality first, credibility first, customer satisfaction is the quality policy our company has always followed, and serving customers wholeheartedly is our service tenet. In many years of service work, we have continuously summed up experience, strengthened our work, and gradually formed a high-quality and complete pre-sales, in-sales and after-sales service system, which has solved customers' worries and improved the credibility of product quality.
Our company solemnly promises that we will strictly control and ensure product quality. It is guaranteed that after the contract comes into effect, the goods will be delivered to the customer's designated location on time according to the delivery date agreed upon by both parties. After receiving the customer's service request notification, technical personnel will be dispatched to the site to provide services provided there are no force majeure factors and convenient transportation. The company's products have a half-year warranty. When repairing equipment, we will accurately and pragmatically provide you with economical and reasonable maintenance solutions and provide technical support to respond to your requests. We keep in touch and communicate with every user at all times and accept your various opinions and suggestions.
There is nothing you can’t think of, just do it with your heart!
Product consultation hotline
Contact Chen Xiaodan
Wangwang
Email
@
Company website
b
Jining Dehai is the most professional Our team will provide you with the best service
Electro-hydraulic car arrester, electric car arrester,
rail hydraulic car arrester,
rail hydraulic car arrester